We are a global manufacturer of analytical and on-line process analyzers. Our many products include: The ASOMA Phoenix II Energy Dispersive X-ray Fluorescence (EDXRF) bench-top analyzers for quantitative analysis of elements Al through U in solids, liquids and powders; the ASOMA 682T-HP On-line Sulfur analyzer which utilizes X-ray Transmission Technology (XRT); the Trace Analytical Gas Chromatograph for the analysis of H2, CO, CO2, and hydrocarbons in ultra high purity gases, ambient air, industrial gases; and the Dycor Mass Spectrometer for residual and off-gas analysis.
We are the manufacturer and distributor of the Pumpmatic Liquid Dispensing System. The Pumpmatic is the fast cost-effective way to speed and simplify fluid sampling in any lab. Each totally closed Pumpmatic offers accurate, easy-to-read graduations from a serological pipette, and the smooth action syringe makes it easy to control sampling and dispensing rates. Pumpmatic is ideal for single or multiple transfers. Lightweight and rugged, Pumpmatic is available either sterile or non-sterile, in 1, 5 and 10 ml capacities.
Controlled Environmental Chamber Manufacturer: Design, install, test, service & validate Walk-In Controlled Environmental & Stability Chambers, HEPA Filtered Cold & Warm Rooms, vaccine, & high capacity -75°C Cascade low temp storage & Biorepository chambers. Provide Reach-In Equipment in four sizes for temperature/humidity control & Photostability chambers in two sizes. ES has complete Service & Validation Departments providing chamber service, IQ/OQ/PQ, PM & Cal, Retrofits & Parts.
Bio-Rad Laboratories specializes in Spectroscopy Databases & Software Solutions (IR, Raman, NMR, MS, UV-Vis). They are a leading producer of spectral databases with over 1.4 million spectra including Sadtler™ Data. Their KnowItAll® Spectroscopy Software offers a range of solutions including: spectral search, spectral data management, spectral identification, quality control, mixture analysis, polymer analysis, chemometrics, etc. This unique combination of spectral software with a vast collection high-quality spectral reference data gives KnowItAll users a distinct advantage when it comes to spectral analysis.
We are a leading manufacturer of GC and GC-MS injection systems including thermal desorption, purge & trap, pyrolysis and headspace. CDS expands the applicability of the GC by allowing solvent free analysis of organic solids, liquids and trace level VOC's in any matrices including air, water and polymers. New this year is our Thermal Desorption & P&T Autosampler, a GC-TCD system for analyzing biomass gases from our pyrolysis micro reactor and a stand-alone reactor for pyrolysis gases.
We are a worldwide provider of optical fiber, fiber bundles, assemblies and spectroscopic fiber accessories. Producing stock and custom silica / silica, non-circular core silica plastic-clad silica, hard polymer-clad silica, silver halide optical fibers, capillary tubing and low loss bundles and assemblies for UV, VIS, and IR transmission. Products for high (+380?C) or low (-190?C) temperature, low to high NA (0.12 to 0.53). Replacement bundles and assemblies for most spectrometer systems and UV curing systems. Custom engineered solutions/ competitive pricing.
Manufacturer of visual and instrumental test kits for measuring more than 50 parameters for water analysis. Our kits feature self-filling reagent ampoules that simplify and speed water quality testing. Industries served include water treatment, chemical process, power generation, petroleum refining, food & beverage and aquaculture. Analytes include: ammonia, chlorine, COD, chloride, oxygen (dissolved), phenols, nitrate, phosphate, detergents, hardness (total), hydrogen peroxide, ozone, iron, nitrite, sulfide and more. For more information call or visit our website.
Come see the proven Calidus Ultrafast Gas Chromatograph incorporating the most innovative technology in GC’s over the past 30 years. The Calidus Ultrafast GC incorporates a patented resistively heated stainless steel capillary column and patented modular design. . Analysis times are 10-50 times faster than conventional lab or process GC’s at one tenth the size and using one tenth the power. It can measure fixed gases and hydrocarbons up to C50 with a full suite of Detectors for Process, Laboratory, and Transportable applications. The analyses are used for product specifications testing, product safety, environmental testing and measurements, process control, catalyst protection, educational tools, spot checks of fuels and many more.
An AMETEK company, Grabner Instruments manufactures a wide range of laboratory instrumentation for every industry. Known for their best-selling vapor pressure analyzer, Grabner also produces flashpoint, gas/diesel/jet fuel composition, color, distillation, and water-in-crude test instruments. New 12 position autosampler offers fast sample throughput.
Our company has developed a new method for fingerprinting of hydrocarbons including crude oils; Hanby Chemical Reaction Spectrophotometry. The New Hydrocarbon ID is a field device that utilizes a chemical reaction and a spectrophotometer to get a spectral curve or fingerprint of the hydrocarbon for both qualitative and quantitative analysis. This is a totally new platform and field ready technology to finger print hydrocarbons for both the oil & gas industry and the environmental industry. This new development represents a paradigm shift in the E&P industry and put a lab in the field for the environmental industry. Additionally, Hanby has the TPH Field Water and Soil Kits it has manufactured for the last 28 years.
Uniflow high performance, low flow fume hoods in models 30” to 96” wide. Benchtop and floor mount, 24” to 48” deep. Available with plumbing & electrical services. Complete line of laboratory furniture, countertops, sinks, & fixture options. UniMax large floor mount hoods, 6’ to 24’ wide and 3’ to 8’ deep. EnviroMax enclosures to isolate lab automation instruments and processes. Standard models available in HEPA filtered clean workstation or vented styles. Modular labs & clean rooms built to exact size & design specifications, class 1,000–100,000. Emergency shower decontamination booths.
Measurement capabilities encompass a wide array of Laboratory, Scientific and Field Portable instruments. Particle Characterization includes Particle Size Distribution, particle shape, particle surface area and Zeta Potential - determined by using Static and Dynamic Light Scattering/Image Analysis and Flowing Gas BET measurements. For Oil Analysis - sulfur, chlorine and a variety of metals are measured. Technologies such as EDXRF, MEDXRF and Combustion VU-Fluorescence are used. Electrochemistry techniques employ measurements of pH, conductivity, resistivity, ISE, ORP and dissolved oxygen.
Our company is the leader in high-performance Raman, fluorescence & elemental spectroscopy. Products include elemental analyzers (ICP, GD-OES, C/S/O/N/H); Raman, fluorescence & EDXRF microscopes for rapid spectroscopy and imaging; highest sensitivity steady-state and lifetime fluorometers; SPR-imaging systems for label-free bio-molecular analysis; optical components, gratings, CCDs, and TCSPC components. New products: LabSpec 6.3 software update with full 3D volume display for Raman, FluoroMax Plus that expands on the performance and sensitivity of the FluoroMax-4 and new EMCCD and Scientific CMOS cameras for low light imaging applications.
For more than 32 years, LCGC has been the gold standard relied upon by chromatographers for unbiased, nuts-and-bolts technical information with a practical focus. LCGC’s columns and peer-reviewed articles continue to bring readers practical technical advice from respected experts in liquid and gas chromatography, including hyphenated techniques; capillary electrophoresis; supercritical fluid chromatography; and more.
Our company supports accurate/compatible measurements by certifying and providing over 1200 SRMs with well-characterized composition or properties, or both. SRMs are used to perform instrument calibrations as part of quality assurance programs, verify the accuracy of specific measurements and to support new measurement methods. The Standard Reference Data Group provides well-documented numeric data to scientists and engineers for use in technical problem-solving, research, and development. The Calibration Services are designed to help in achieving high levels of measurements.
Our company manufactures high efficiency gas generators to eliminate high pressure cylinders from the laboratory. Gas generators provide increased safety, free up laboratory space, save money and produce ultra high purity gasses for your laboratory instruments. With a gas generator you are in control. These state-of-the-art gas generators continuously produce ultra-high purity gases for LC/MS, GC, FT-IR, TOC, ICP, AA and other instrumentation. All products are backed by fully staffed field sales and service organizations and one-year warranty. Preventative maintenance programs and extended warranties are available for all Parker Balston products.
We are a leading manufacturer of hydrogen, nitrogen, and zero air gas generators to replace high pressure cylinders used with laboratory instrumentation. Frequent applications for domnick hunter systems include LC/MS, GC, GC/MS, FT-IR purge and solvent evaporation.
With annual sales of $13 billion in fiscal year 2013, Parker Hannifin is the world’s leading diversified manufacturer of motion and control technologies and systems, providing precision-engineered solutions for a wide variety of mobile, industrial and aerospace markets. The company employs approximately 58,000 people in 49 countries around the world. For more information, visit the company’s website.
Our Precision Fluidics Division introduces the Parker Smart Syringe Pump. At one third the size and weight of standard 30mm syringe pumps, the Parker Smart Syringe Pump improves the performance of Analytical Chemistry systems by increasing resolution and bringing the pump to the point of dispense. Parker Precision Fluidics is a leading supplier of miniature fluidic components and system solutions integral to the world’s medical and analytical instrumentation. Product technologies include pneumatic and chemically inert isolation valves, diaphragm pumps, syringe pumps, electronic pressure controllers, and sub-systems. Parker provides complete solutions comprised of a broad range of components. For more, visit our website.
Our company offers Analytical Laboratory and On-line Testing Instrumentation for petroleum (gasoline, kerosene/jet fuel, diesel, biodiesel, oils, lubes & greases, crude oil, LPG, and asphalts), rubbers & polymers, foods, flavors, fragrances, pharmaceuticals, environmental, paints and coatings industries.
We are a leading technology-driven pharmaceutical Contract Manufacturing Company. Our capabilities include assembly and supply of precision tools and injection-molded plastic parts for the medical, automotive, commercial, industrial, consumer and pharmaceutical industries. Liquid Manufacturing and Packaging of Sterile and Non-Sterile Liquid Product Platform include: Pharmaceutical Products; OTC; Prescription; Medical Device Products; Regents; Test Kits; Combination Products; Nutraceuticals
Our company provides data collection software for laboratories, manufacturing, hospitals, pharmaceutical, process control and more. Its WinWedge <TM>software collects data from balances, meters, gages, sensors and any serial or TCP/IP connected lab instrument or device. WinWedge inputs the data in real-time to MS Excel, Access, data files, LIMS, the Internet and more. Easily collect and analyze data from all your lab instruments in real-time. Only $259 for any version of Windows. TALtech also providesTCP/IP communication and barcode software.
American branch of VELP Scientifica, an Italian company with more than 30 years’ experience in design, manufacture and distribution of high quality laboratory equipment, is a key reference for lab, research centres and QC departments worldwide. Applications range from food&feed and water analysis to stirring solutions. VELP analytical instruments include Kjeldahl apparatus, Dumas analyzer, fat and raw fiber extractors. Sample preparation instruments include BOD, COD, incubators, Jar Test, vortex mixers, overhead and heating/magnetic stirrers. TEMS™ technology saves Time, Energy, Money and Space, pursuing VELP’s commitment to optimize ecology and economy and protect our planet.
We are a manufacturer of high purity, inorganic and metallo-organic certified reference materials and calibration standards for spectrochemical analysis (IC, ICP/ICP-MS, AA/GFAA, & XRF) and a supplier of instrumentation consumables. We also provide instrumentation training and analytical testing services (elemental analysis in a wide range of sample types). ISO 9001, Guide 34, 17025 & 17043 accredited. As part of the LGC Group, we are committed to providing Science for a safer world.